DTF PRINT

DTF TRANSFER 

Transfers may not always give the right result with ironing. You should transfer them with a heat press.

The designs are adjusted according to the ordered width measurement, and the length measurements vary proportionally.

This transfers can be applied to all blends and colors fabric.

DTF Transfer Application Instructions
Preheat the garment for 15 seconds to remove excess moisture. Let the garment cool before adding the transfer.
Place the transfer on the shirt white side down, image facing up.
Press at 325F for 15 seconds under very firm pressure.
Remove the garment from the press and let it stand until it is warm enough to peel.
Peel warm or cool.
Cover the image with parchment paper and press again for 15 seconds. You can use a Teflon sheet, butcher paper, or tissue paper.
***Please note: If the image does not come off completely, repress with the image in place, let it cool, and repeel the film.
Care Instructions: Turn the garment inside out. Machine wash cold. No bleach. No softener. Do not dry clean or iron. Tumble dry low.